Urethane Casting
Urethane casting is a fast and cost-effective method of producing small series from a silicone mold. A silicone mold is made with the help of a prototype which serves as the basis for the duplication process of the original piece. Thanks to the flexibility of the silicone, complex intermeshing geometries can be achieved without demoulding problems. The base material used for the reproductions is a liquid polyurethane resin which with the use of additives can simulate the properties of a wide variety of plastics. Between 15 and 30 parts can be produced depending on the requirements of the material and surface finish. This method is ideal for the production of small batches and prototypes in which the production of expensive injection molding tools is not feasible

Merak, pay gibi ve Yorumlamak için giriş yapınız!

Surface Treatment
The quality of the surface treatment determines the value and ultimately the success of a product. That's why we go the extra mile. RPWORLD offers a variety of surface finishes to meet the customer requirements.

Merak, pay gibi ve Yorumlamak için giriş yapınız!

Sheet Metal Fabrication
Sheet metal is metal formed by an industrial process into thin and flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Thicknesses can vary significantly; extremely thin thicknesses are considered foil or leaf, and pieces thicker than 6 mm (0.25 in) are considered plate. At RPWORLD, our sheet metal fabrication service is designed for rapid prototyping, end-use production and assemblies.

Merak, pay gibi ve Yorumlamak için giriş yapınız!

3D Printing
3D printing or additive manufacturing (AM) is any of various processes for making a three-dimensional object of almost any shape from a 3D model or other electronic data source primarily through additive processes in which successive layers of material are laid down under computer control. Selective laser sintering, (SLS), Stereolithography (SLA) and Fused Deposition Modeling (FDM) are the most common additives manufacturing processes that RPWORLD uses to realize a project. At RPWORLD, additive manufacturing is designed for functional prototypes, complex designs, and production components.

Merak, pay gibi ve Yorumlamak için giriş yapınız!

Injection Molding
The injection molding process is the most common, most important and economical process for the mass production of plastics, especially high performance engineering plastics. We offer rapid tooling (prototype tooling), trial tooling ( bridge tooling ), hardened tooling, low volume production, high-volume production (mass production) and on-demand production.

Merak, pay gibi ve Yorumlamak için giriş yapınız!