Which is preferable,paving with a tile seam or paving with a close seam

In the decoration industry, the question of whether or not to leave a seam is a classic debate. The majority of homeowners do not want a seam between ceramic tiles because if the seam is left, the tiles are more likely to become dirty

In the decoration industry, the question of whether or not to leave a seam is a classic debate. The majority of homeowners do not want a seam between ceramic tiles because if the seam is left, the tiles are more likely to become dirty, yellowed and moldy, making the floor and walls not only unsightly but also difficult to clean, whereas seamless pavers can make the space appear smooth and organized. Why is it always stressed that the seam must be left when it is stated that tile seamless paving is truly excellent in every way?

The reason for leaving a seam on the ceramic tile is as follows: 1.

To begin, the wall tiles china and the cement mortar pasted with the ceramic tile will have the problem of thermal expansion and cold contraction, which will cause certain expansion and contraction when the temperature or humidity changes, and the lack of a joint will cause the ceramic tile to bulge or crack during its later use process. On the other hand, despite the fact that ceramic tiles are currently produced using mechanized methods, there are still some size errors in the manufacturing process, which do not leave seams and are easily visible in the paving seam, which detracts from the aesthetics of ceramic tiles.

Additionally, it can enhance the way and effect of tiling, and it is more convenient for later maintenance. It also includes more errors than manual tiling, which means it is more inclusive of the errors that exist when manual tiling is performed. In a nutshell, it is effective, quick, and cost-effective!

It has been a long time since the so-called seamless brick appeared in the ceramic industry, but it refers to the tile in which the surface and side are at 90 degrees right angles. A flat edge and consistent specification are achieved after firing by cutting or polishing the piece after firing. The seamless brick, on the other hand, is only a concept. Because of the physical properties of ceramic tile, it will continue to be affected by cement tension, thermal expansion and contraction, and other factors in paving and use. It will not be able to achieve true seamless paving, but it will be able to achieve the effect of reducing the gap between the paving layers.

2. How can I deal with a crack in a ceramic tile more effectively?

The majority of construction masters will employ a special cross locator during the tile paving process in order to ensure that the tile joint is straight and uniform, thereby enhancing the paving effect and aesthetics of the finished product. The cross positioner has a width of 1 mm, 2 mm, 3 mm, 5 mm, and so on, and these sizes are set in accordance with the standards for all types of ceramic tile seam, including glazed ceramic tiles manufacturers seams. Typical examples include the paving of antique tiles and matte tiles, which require 3-5mm joints; the paving of inner wall tiles, which require 2-3mm joints; the most commonly used full glazed floor tiles, which can leave a seam of less than 2mm, but the minimum should not be less than 1mm; and the paving of inner wall tiles, which require 2-3mm joints.

What do you think about the chasm?

It is widely used in the field of decoration engineering, and it is necessary for ceramic tiles to maintain their seams in order to function properly. First and foremost, it has excellent adhesion and sealing properties, can be waterproof and moisture-proof, and always keeps the gap dry while simultaneously protecting the tiles from bacteria and extending the service life of the tiles. Second, because it is an epoxy material, it is hard and smooth, does not wear easily, and is simple to clean.

It is important to note that if you plan to do tile seaming at home, the size of the seam should be kept between 1.5 and 3mm. The reason is that, if the tile seam is too large, it is easy to conceal ash, and it is also easy for scale to accumulate in wet places, which will result in the creation of a potentially hazardous health hazard. If the remaining seam of ceramic tile is too small, it will not be possible to use a glue gun for aesthetic sewing, resulting in a longer aesthetic sewing time as well as an increase in cost.

Does it make a difference if the ceramic tile is laid with a tight seam?

According to historical records, the concept of close seam paving was first introduced in the 1990s and has since become widely used in the stone industry. In the field of ceramic tile, seam reservation has become the most popular option due to the limitations of production technology and paving technology available. The introduction of the marble tile category has resulted in the development of sealing paving as a breakthrough technology that marble tile manufacturers are constantly pursuing in order to achieve a decorative effect that is comparable to that of natural stone.

Jianyi marble tiles were the first to introduce the continuous pattern close seam paving technology in 2018, and the tile gap can be as small as 0.5mm. In April of this year, the company's close seam and continuous grain super wear-resistant diamond glaze production technology was recognized as being at the international advanced level. Additional innovations include: Tongli marble tile's 0.3mm close seam paving technology, Xinhao marble tile's 0.5mm international European standard micro seam paving technology service, and Golden Age marble tile's 0.5mm close seam paving technology for continuous pattern large plate.

Close seam paving has emerged as a major trend in the field of porcelain tiles price, and it is not difficult to see why. The rise in popularity of this type of close seam paving technology is actually linked to the minimalist style that has become increasingly popular in recent years. The integration of space is important in minimalist design, and the big board that can meet this point will explode, but it will be difficult to break through the bottleneck of transportation, processing, and paving. It is possible to completely avoid these disadvantages through the use of close seam paving and continuous patterning, which can not only make the space effect more integrated, but also make the texture connection more natural and real, and make the marble tile, which further replaces natural marble, the first choice in the high-end decoration market.

4. Is the entry point for close seam paving a difficult one to cross?

Because the effect of marble tile close seam paving is so good, it begs the question of why there are so few ceramic tile brands that are truly committed to this process.

In the tile production process, close seam paving has stringent requirements, including poor flatness, size difference, water absorption, thermal expansion coefficient, and other indicators that must be tightly controlled within a very narrow range. This type of marble tile can be used to create a close seam paving foundation.

Product quality is the foundation, and the bonding material used in the paving process is also critical. When traditional tile paving is used, the shrinkage rate of the cement mortar is high, which makes it easy for the tiles to crack. When ordinary tile glue is used in close seam paving, it is difficult to guarantee the project quality and service life. As a result, it is necessary to develop new auxiliary materials for close-joined paving, as well as to employ special tile glue that is of higher quality, has less shrinkage, and has greater adhesiveness.

When it comes to close joint paving, the construction technology used by the workers is the most important and difficult to overcome. Zhongtao Jun has conducted interviews with a number of dealers who have recently introduced the marble ceramic tile china brand of close seam paving to the market. As finished product delivery service providers, the majority of them agree that cultivating a construction master who can make close seam paving takes a significant amount of time and effort. More training and learning opportunities must be provided by the brand headquarters, but dealers themselves must also provide more favorable working conditions in order to retain such talent.

The cost of decoration will be significantly higher than that of the traditional paving method in order to achieve the desired effect of close seam paving; in order to ensure the quality of the ceramic tile, the manufacturer of this technology must be dependable and trustworthy.